GB-10
Unpacking and Getting Ready
This microwave is designed for home use. It should
not be used for commercial catering.
1. After unpacking your microwave, check that it
has not been damaged whilst in the box. Make
sure there are no dents on the oven, and the
door closes properly. A dented or damaged oven
could allow microwave energy to escape. Make
sure that you have taken all the packaging from
inside the microwave. Please dispose of the
plastic wrappings or bags safely and keep out of
the reach of babies and young children.
2. Choose a flat work surface for your microwave
away from heat sources such as radiators or fires
and away from cold areas. You should allow a
10cm space all around the oven and 30cm above
so that warm air can escape from the vents
during cooking – This microwave is not designed
to be built in. (See Fig. 1)
3. Plug your microwave into a standard household
electrical socket (230-240 volt, 13 amp rated).
Avoid using a socket that also has an adaptor
and other equipment plugged in. Do not use a
multi-adaptor.
4. Put the turntable ring inside the microwave and
place the glass turntable on top of the ring. (See
Fig. 2) The turntable is shaped to sit securely on
the spindle. You must always use the turntable
and ring whenever you use the microwave.
5. To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
(See Fig. 3)
1
30cm
10cm
10cm
2
3
Underside View
Logik L25GB10_IB_GB_100203.indd 10
2/3/10 2:20 PM
