Logik L23IP11, Instruction Manual, Page: 39 / 64

39
GB
En
ter
tainmen
t
Wireless.Network.Setup
Use the Network Setup when connecting your TV to a wireless network.
1.. Plug the connected devices into the mains socket before switching on the TV.
2.. Press the .STANDBY button on the top panel of the TV or the . button on the remote control to turn on your TV.
3..
Press the
. .I﹣Player
button on the remote control to enter
i﹣Player
.
When you first enter i﹣Player there is a delay whilst the network card
boots. Please be patient.
5.. If you have difficulty connecting or there is a "No Internet Connection"
message on the screen. Press the
IP button on the remote control. The
Network.SETUP
menu will be displayed.
6..
Press the buttons to select
Connection.Type
. Press the
OK
button
and then press the buttons to select Wired . Press the OK button to
confirm.
7..
Press the buttons to select
IP.Address
. Press the
OK
button and
then press the buttons to select Automatic.IP or Fixed.IP . Press the
OK button to confirm.
Automatic.IP
Select this if the network supports is a DHCP (Dynamic Host
Configuration Protocol). The IP address will automatically be determined.
Fixed.IP
Select this if there is no DHCP server on the network or you want to set
the IP address manually.
Press the buttons to select Edit . Use the buttons to navigate
IP.Address./.Network.Mask./.Gateway./.DNS.Server and then press the
0﹣9
buttons to enter your IP address details.
8.. Press the buttons to select Apply and then press the OK button
to confirm.
Connecting.to.a.Wireless.Network
Use the Wireless LAN adapter to connect the TV’s USB / WIFI socket.
In Wired mode the TV will connected to the router
automatically as soon as the connection is made. You will
see a message "Not connected" change to "Connected" at
the top of the screen. This means you are connected to your
local network.
LAN1 WAN LAN2 LAN3 LAN4
Rear Left Side View of TV
Wireless Router
Wireless LAN Adapter
(not included)
Internet
L23IP11_IB_Running Change110923_Annie.indd 39 11年10月13日 下午6:08