GB
18
FM Operation
Switching from DAB to FM Mode
To switch the unit to FM mode, press the Mode button repeatedly to select FM.
The LCD display will show “switch to FM”, and show the frequency.
Auto Scan
To search for an FM station, you need to press the Scan button. This will start
scanning up the frequency band. To scan down the frequency band, press and
hold the Scan button. Once a station has been found, the scanning will stop
automatically.
If no station is found, then the tuning will stop once it has cycled through the
entire FM band (87.5-108MHz).
Manual Scan
To search FM stations manually, simply press the buttons repeatedly or press
and hold until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by
pressing the buttons repeatedly. Each press will adjust the
frequency by 0.05MHz. If reception is still poor adjust the position
of the aerial or try moving the radio to another location.
Audio Mode
Press the Select button to toggle between the Auto or Mono options.
Presetting Stations
You can store up to 10 of your favourite stations to the memory. This will enable
you to access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like
to save. Press and hold the 0-10 buttons to store a desired radio station.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it
by pressing the 0-10 buttons.
2. If you choose a preset that hasn’t been allocated a station, the “Empty preset
#“ will be displayed.
L1DA12E_IB_RC_Final120917.indb 18
17/9/12 2:16 PM
