![Logik L17SKC14 Instruction Manual Download Page 2](http://html1.mh-extra.com/html/logik/l17skc14/l17skc14_instruction-manual_1935198002.webp)
0.5L
MIN
4
3
• Never open the lid while the water is
boiling. The steam coming out from the
kettle is very hot.
• In case you accidentally operate the kettle
without water, its protection mechanism
will not allow you to switch on the power.
The power switch will light up.
0.5L
MIN
5
4
3
WHEN THE WATER HAS BOILED
The kettle will automatically switch off (indicated by the
symbol ‘0’ ).
• Ensure that the switch is not obstructed
and the lid is firmly closed. The kettle will
not turn off if the switch is obstructed or
if the lid is open.
• After removing the kettle, there may be
some water on the surface of the stand.
This is condensation from the steam after
boiling. This is normal and should not be
a cause for alarm.
DESCALING THE KETTLE
Depending on the hardness of the water in your area, limes-
cale may be deposited on the heating element and the inside
of the kettle. This normal build-up is not harmful to health but
an excessive amount of scale may affect the performance of
the kettle.
To descale, fill the kettle with distilled water up to three-quar-
ters of the Max level and bring the water to boil. After the
kettle has switched off, add a descaling solution. Never
attempt to descale the kettle by chipping or scraping with a
sharp implement.
SPECIFICATIONS
Mains supply:
220-240V
Power consumption: 2520-3000W
We continually strive to improve our products. Specifications
may change without prior notice.
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth.
Do not use abrasive cleaners or scouring pads which may
damage the finish of the kettle.
Never immerse the kettle or the stand in water and always
keep the electrical contacts and the power connector hole
dry. Always disconnect from the mains before cleaning the
stand.
Do not insert any foreign objects or allow any
liquid to spill into the Power Connector Hole.
Power Connector Hole
Ensure the kettle is cool before removing the filter.
CLEANING THE REMOVABLE SCALE FILTER
To prevent loose particles of limescale being poured into
your beverage, your kettle is fitted with a scale filter. You
may remove the filter and fit it back in after cleaning.
1. To remove the filter, open the lid.
2. Grip the filter’s lip firmly and pull upwards.
3. Wash the filter under running water.
4. Slot the filter into the grooves inside the spout.
5. Push (gently) into place.
The symbol on the product or its packaging
indicates that this product must not be disposed of
with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment
by handing it over to a designated collection point
for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of
your waste equipment at the time of disposal will
help conserve natural resources and ensure that it is
recycled in a manner that protects human health
and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
authority, or where you purchased your product.
L17SKBK_C_GR_R14_Final140227.pdf 2 27/02/2014 5:38 PM