GB
29
Descaling the Kettle
Depending on the hardness of the water in your
area, limescale may be deposited on the heating
element and the inside of the kettle. This normal
build-up is not harmful to health but an excessive
amount of scale may affect the performance of
the kettle.
To descale, fill the kettle with distilled water up
to three-quarters of the Max level and bring the
water to boil. After the kettle has switched off, add
a descaling solution following the manufacturers
instructions. Never attempt to descale the kettle
by chipping or scraping with a sharp implement.
Do not insert any foreign objects or allow any liquid to spill into the
Power Connector Hole.
Power Connector Hole
Cleaning the Kettle
The kettle exterior should be cleaned with a soft damp cloth. Do not use
abrasive cleaners or scouring pads which may damage the finish of the
kettle.
Never immerse the kettle or the stand in water and always keep the
electrical contacts dry. Always disconnect from the mains before cleaning
the stand.
MAX
1.0L
0.5L
MIN
0.3L
MAX
1.0L
0.5L
MIN
0.3L
L10KBS13E_IB_7L_Final_130828.indb 29
03/09/2013 11:23 AM