manualshive.com logo in svg

Logicube ZClone Xi, User Manual, Page: 81 / 98

Share
Download
Logicube ZClone Xi User Manual Download Page 81

 

 

Logicube ZClone™Xi User’s Manual 

 

73 

8:   Options  

8.0   Options - Introduction 

The ZXi has several available additional options including software options and additional accessories. For 
a complete list of available options, please visit 

https://www.logicube.com/shop/zclonexi

. This section lists 

the following options: 

 

4 Drive Expansion 

 

Serial Attached SCSI (SAS) Capability 

 

Hash Verification 

 

PCIe Bridge 

To purchase one or more of these options or adapters, please contact Logicube Sales department at 

[email protected]

. 

8.1   4 Drive Expansion 

The optional expansion kit provides an additional 2 SAS/SATA and 2 SATA only targets for a total of 9 
SATA (7 SAS) targets when cloning from a master drive or 10 SATA (8 SAS) targets from a network 
repository or from a repository stored on an external USB enclosure connected to the ZXi.  

If the SAS option is installed and the Drive Expansions are installed, bays T6 and T7 will be able to detect 
and use SAS drives. 

If the SAS option is 

not

 installed and the Drive Expansions are installed, bays T6 and T7 will only be able 

to detect other supported drives except for SAS drives. 

8.1.1   Attaching the removable ZXi DriveStation 

Follow these steps to attach the removable ZXi DriveStations to the ZXi’s expansion slots: 

1.

 

Remove the cover on one of the expansion ports (T6 through T9) using a Phillips 
head screw driver. There are two screws on the cover (one on each side). Set the 
two screws aside as they will be used for the ZXi DriveStation. 

2.

 

Connect the ZXi DriveStation to the open port from step 1. When inserted 
properly, the ZXi DriveStation should not be protruding or sticking out. 

3.

 

Use the two screws set aside from step 1 to tighten and set the ZXi DriveStation 
in place. 

Summary of Contents for ZClone Xi



































































































Reviews:

No comments