INTRODUCTION
Logicube WriteProtect™ BAY User’s Manual
2
1.1 Features
The standalone WriteProtect-BAY mounts into a standard 5.25” half-height forensic workstation
drive bay for efficient imaging and preview tasks in the lab.
Superspeed USB 3.0 host connection for extremely fast operation.
Built-in, read-only, write-blocked support for SAS/SATA/USB 3.0/2.0/1.1/FW400/800 storage
technologies, an adapter is included to support 2.5”/3.5” IDE drives.
Multiple source drives can be connected to the WriteProtect and imaged, using your forensic
imaging software, simultaneously to shorten processing time.
Features 2 SAS/SATA drive ports, 1 USB 3.0 port, 1 FireWire port, 1 Gigabit Ethernet port.
Support for IDE, 1.8” IDE, 1.8” ZIF, mSATA, microSATA, eSATA and flash media is available using
optional adapters.
Use the browser-based user interface to manage all WriteProtect operations including software
updates. Connect to your network using the WriteProtect’s Gigabit Ethernet port.
Preview drives connected to WriteProtect using the browser-based user interface.
HPA/DCO detection and capture supported via the browser-based user interface.
5 LEDs for power, host, device, activity, HPA/DCO detection allow you to easily monitor all
processes.
Compatible with forensic acquisition and analysis software.
1.2 Specifications
1.3 In the Box
The following items are included with WriteProtect BAY:
2 SAS/SATA power & data cables
1 FireWire cable
1 USB 3.0 Type A Male to Micro-B Male
1 Cat 6 network cable
1 2.5”/3.5” IDE to SATA adapter
1 Dual 4-pin molex to 6-pin PCIe Y adapter
