Logicube SCSI-NG, User Manual

Page: 33 / 74

CLONING
Logicube SCSI-
NG User’s Manual
25

SHA-256 – Uses the SHA-256 algorithm to hash the Master. This is available when using
the following modes:
o
Drive to Drive
o
Drive to Image

MD5 – Uses the MD5 algorithm to hash the Master. This is available when using the
following mode:
o
Drive to Drive
Verification Method/Verify – Available selections are YES or NO . Select YES to hash the Target
and verify that hash with the hash calculated from the Master.
The Verify feature is an option. To find out if this option is
installed, go to the Statistics icon from the navigation menu
on the left and select the Options tab. To purchase the Verify
option, contact our sales team at: sales@logicube.com .
4.3.5 File Image Method Settings
The File Image Method Settings screen allows the user to select a file image output mode. The
output modes available are:

Mirror – Creates a bit-for-bit image of the Master.

Clever – Copies only sectors containing data and compresses the image file.
4.3.6 Clone Method Settings
When Drive to Drive or Drive to Image mode is selected, Clone Method Settings will appear on
the top-right of the Settings screen. Depending on the cloning method chosen, the Clone
Method Settings screen has can have different settings:
Mirror – If mirror is selected or used, the following settings are available:

Length – Set the percentage or number of blocks to clone. By default, this is set to
100% of the Master.

Master Start – Set the percentage or number of blocks from the start of the Master.
By default, this is set to 0%, or the beginning of the Master.

Target Start – Set the percentage or number of blocks from the start of the Target.
By default, this is set to 0%, or the beginning of the Target.
The specific number of blocks can
be set for each of the options by
tapping the
(edit) icon.
This screen also displays an option to select whether the Master drive is a part of a RAID
configuration or a NON-RAID configuration.