Logicube F-FALCON-SA User Manual Download Page 113

Page: 113 / 168

TYPES OF OPERATIONS

Logicube Forensic Falcon™ User’s Manual

104

Falcon: From the web via a network connection or from a USB drive.

For the latest step-by-step instructions on how to update the
Falcon software, please read the

Falcon Software readme

file

located on the following site:

http://www.logicube.com/knowledge/forensic-falcon

In-depth information on updating the Falcon software can be
found in

Chapter 9: Updating the Falcon Software

6.0.14 Power Off

There are two tabs in the

Power Off

screen:

POWER OFF –

The Falcon can be remotely turned off by going to this tab.

Additionally, the Graphical User Interface (GUI) can be refreshed.

DRIVE POWER

–

Inactive drives connected to the Falcon can be set to go to

standby mode in this tab. The default is set to 0 minutes (OFF).

Summary of Contents for F-FALCON-SA









































































































































































Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands

Logicube F-FALCON-SA, User Manual

Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands