LogicPower LP-650VA-P, User Manual

Page: 3 / 22

USER MANUAL 3
3. Unpacking and inspection
Examine the packing carton for damage. Notify your dealer immediately if damage is ob­
served. Store the packing in a safe place for possible future trans-shipment of the UPS.
pic 2
4. UPS installation
Position the UPS on a sturdy, dry surface in a well-ventilated area away from direct
sources of heat. Leave at least 100mm clearance all around the UPS, as it shown on
pic2 , to provide adequate ventilation.
The UPS is intended for indoor use only. Although your UPS is very rugged, its internal
components are not sealed from the environment. Kindly note the following.
*Avoid direct sunlight.
*Avoid excessive heat
*Avoid excessive humidity or liquids.
*Avoid excessive dust.
5. Connect
UPS to power
Connect the Power Cord,
to a verified grounded sock­
et. Do not power the UPS
using a surge suppressor
or power strip. Switch the
utility power ON.
Model:
Serial number:
v____ /
Input
pic 3
w w w
.
l o g ic p o w e r
.
u a