22
2.3 Memory card
Insert the card into the memory card reader following the steps below
Remove the back cover from the phone, and then remove the battery.
Push the metal clip in the direction of the arrow shown in photo (1) to raise it up
Insert the memory card into the slot provided, with the metal contacts facing downwards, refer to photo (2)
Close the metal clip and drag it in the direction of the arrow shown in photo (3) to lock the memory card
(1)
(2)
(3)
Tip: If the memory card does not work, check that it is inserted correctly and also check the metal contact
points. You can also try to format the memory card.
You shouldn’t have to close the metal clip with a lot of
strength.
3. Battery
3.1 Installing the battery
Remove the back cover from the phone.
Place the end of the battery that has the metal contacts against the battery connector.
Gently push the battery down and press on the other end of it to snap it in.
Tip: Do not force the battery connector as it can be damaged.
Keep the battery away from any source of flame. Follow local laws as well as regulations for disposing of used batteries.
Check the serial number of the charger before charging the mobile phone.
Use only a battery, charger and accessories that have been approved for use with this phone model. The use of other types of batteries, chargers
and accessories may invalidate certification and or warranty conditions for the equipment and may be dangerous.
Return the waste and used batteries to the supplier or a recycling site.
WARNING:
The battery may explode if you replace it with a model that is not compatible.
Dispose of used batteries according to the instructions.
