10. Charge and use the battery
IMPORTANT: The battery must be charged for at least 5-‐8 hours before first use.
Charge the battery:
1 . To charge the battery , connect the plug of the AC adapter (supplied) in the area of your
tablet and the other end of the AC adapter into an AC current input.
2 . Icon battery lights during charging and indicates the charging status.
3 . When the battery is fully charged, you can unplug the AC adapter from the camera and
the power outlet.
Note: You can use the device while it is charging. It is then possible that the full charge of
the battery is longer .
• Use only the supplied AC adapter for your device . Do not use other power supplies or
other electrical devices .
• Whenever possible , please keep the device connected to the AC adapter and a power
outlet to recharge the battery .
• The electrical outlet to which this apparatus is connected must be installed near the
equipment and shall be easily accessible .
• Wait at least 5 seconds always after switching off the device before restarting .
Immediately turn OFF the device can damage the electrical circuits.
Do not disassemble the battery. Do not throw the battery into fire or water . Do not charge
the battery pack if the ambient temperature exceeds 45 ° C. For repair or replacement
battery , please contact a qualified technician . To recharge the battery , use only the
supplied adapter.
The lifetime of the battery depends largely on the use you make of it. Do not expose the
battery to temperatures below 0 ° C or temperatures above 60 ° C. Functioning could be
altered .
WARNING : Important electromagnetic interference or electrostatic discharges can cause a
malfunction or data loss . If the unit does not operate properly, reset the tablet or unplug
the AC adapter from the electrical outlet , and then reconnect it.
Summary of Contents for E731
Page 1: ...USER S MANUAL Tablette tactile Wi Fi Logicom E731...
Page 9: ......
