Plug in the Telephone and Power Cords
3
User’s Step-by-Step Installation
Place Green Rechargeable batteries in the
compartment on the bottom of the base unit.
Make sure to turn ON/OFF switch to ON. You
will hear the announcement “Running on
Battery Power.” Unit will do so until the AC
Adapter pwer supply is plugged in.
Place spare pendant
Lithum Ion battery in
the charger on the
front of the base unit.
Place one Lithium Ion battery into
the pendant by unscrewing the
cap and inserting FLAT SIDE UP.
As soon as cap is tightened, the
red light flashes as the pendant
does a self-check and announces
the battery status.
Place Batteries in Unit
2
Test the Unit
4
Confirm Accessories in Kit
1
Plug the AC Adapter power
cord into the power jack and
twist right to lock.
Plug one end of the supplied phone cord
into the “Line In” jack. Connect the other
end into the wall (or modem)phone jack.
(OPTIONAL) Plug the
telephone into the the
“To House Phone” jack.
4 Rechargable AA
Backup Batteries
2 Lithium Ion
Pendant batteries
Telephone Cord
1. Press the Blue Button
for 4 seconds to send test
alarm
2. The Red light will flash.
You will hear dialing
and other sounds as the
alarm is sent.
3. When the operator
answers, just tell them
you are testing.
4. Once you speak to
the operator, setup is
complete!
Wrist strap
AC Adapter
Lanyard
Beltclip
Press the gray Test
Button for 4 seconds, or
until you hear two beeps.
This test informs of base/
pendant communication,
telephone line detection,
and battery status.
Perform this test every other
week or if the INFO light is
blinking.
(Make sure charging light
turns RED, indicating
that the charger is ON
and that the battery is
being charged.)
Place a call to the
Central Station
Perform Bi-weekly
system tests
