background image

SILVERsensor Manual

8

iv. 

Residual Risks

DANGER

To reduce the risk of electric 

shock:

• Always unplug the Bed Frame  

from the electrical outlet 

before cleaning. 

 

WARNING

To reduce the risk of burns, fire, electric shock, or injury 

to persons: 

•  Unplug the Bed Frame from the outlet before putting on 

or taking off parts. 

•  Close supervision is necessary when the Bed Frame is 

used by, or near children, invalids, or disabled persons. 

•  Use this Bed Frame only for its intended use as 

described in these instructions. Do not use attachments 

not recommended by the manufacturer. 

•  Never operate the Bed Frame if it or any parts have a 

damaged Cable or Plug, are not working properly, have 

been dropped or damaged, or dropped into water. 

Return the bed for examination and repair or replace it. 

•  Keep all Cables away from heated surfaces. 

•  Never drop or insert any object into any opening. 

•  Do not use outdoors. 

•  Do not operate the Bed Frame where aerosol (spray) 

products are being used or where oxygen is being 

administered. 

•  To disconnect the Bed Frame, turn all controls to the off 

position, then remove plug from outlet. 

•  WARNING: Risk of injury – keep children away from the 

extended foot support (or other similar parts). 

 

Summary of Contents for SILVERsensor

























Reviews: