LOGICDATA IRR-DDSET, Operation Manual

Page: 17 / 17

Appendix
Trouble Shooting
Defect Cause Correction
Drives don’t work
System is not
plugged in Plug in the mains cable.
IR-receiver is not
plugged in. Plug in the IR-receiver.
Bad wrap
connection
Put in the plug correctly.
Wrong channel
selected
Set up the correct channel.
Drive defect. Call the customer service.
IR-receiver defect. Replace the IR-receiver.
IR-transmitter
defect.
Replace the IR-transmitter.
Drive only goes in
one direction IR-transmitter
defect. Replace the IR-transmitter.
IR-receiver defect. Replace the IR-receiver.
Green Led on IR-
transmitter is not on Batteries not put in. Putting in batteries.
Batteries empty. Putting in new batteries.
Batteries put in
incorrectly Correctly putting in batteries.
IR-transmitter
defect.
Replace the IR-transmitter.
Water protection, Cleaning
·
The IR-transmitter and the IR-receiver may be cleaned with a dry or a slightly
wetted cloth only.
Danger for Persons!
·
There may be not liquids getting into the plug-in connections.
Danger for Persons!
Technical Data
See datasheet.
- 17 -