Thank you for purchasing a Level wireless vehicle leveling system. This
product was designed for ease of use and utilizes the best possible components and
engineering to achieve accuracy you can count on. We believe you will find it to be
an extremely useful and time saving tool. Level is proudly Made in the
USA.
Important Information about your Level
The Level has an on/off switch that controls power from the battery to the
system. When the switch is in the off position the battery is completely disconnected
from the system and no power will be drawn from the battery. Turning the unit
completely off using the switch is recommended when driving for long distances or
when the vehicle is in storage. When the switch is in the on position the
Level will operate in an automatic power management mode. When you
first switch the unit on it will be connectable from the smartphone or tablet app and
will remain that way for a configurable number of hours while the unit is not detecting
motion (see Step 5 in the Setup and Installation section). After the configured
number of hours with no motion detected the Level will enter a sleep mode
to conserve the battery. Once motion is detected, the unit will wake and will be
connectable again. So, when you move the vehicle and arrive at a new location you
will be able to start the app and use the product to level the vehicle. If you ever try to
connect to the Level and are unable to do so, the unit is likely in the sleep
mode. You can wake the unit without motion by cycling the on/off switch to the off
position and then to the on position. When you move the switch to the on position
you will hear 2 beeps. This will indicate that the unit is powered on and that the
battery is in good condition. If you ever move the switch from the off position to the
on position and don’t hear 2 beeps this will indicate that the battery needs to be
replaced. The LevelMatePRO app now has a setting that allows the
‘Wake on
Motion
’ feature to be turned off if desired. When the ‘Wake on Motion’ setting is off
and the configured number of hours to
‘Idle Time Until Sleep’ is reached, the
Level will turn itself off and will not wake when motion is detected. This
allows users who do not want the unit coming on when traveling in the case where
they forgot to turn the Level off after their last use. Please note that both
the
’Wake on Motion’ and ‘Idle Time Until Sleep’ settings will be disabled when the
‘Run Continuously’ setting is turned on (see Step 5 in the ‘Setup and Install the
Level
’ section of this manual).
