21
Cleaning the Heat exchanger
• Allow the heat exchanger to cool down before cleaning.
• Do not touch the heat exchanger fins.
1. Turn off the dryer and remove the plug from the mains. Allow the dryer to cool down.
2. Open the heat exchanger flap on the front of the dryer.
3. Release the blue clips and remove the cover.
4. Remove any dust or fluff from the heat exchanger by vacuuming the fins, clean between all
the metal fins. Be careful not to touch the fins as you may damage them.
5. Replace the cover and close the blue clips.
6. Close the heat exchanger flap on the front of the dryer.
Cleaning the Humidity Sensor
If you look inside the drum you will see 2 metal strips. They are at the front of the drum behind
the lint filter. These need cleaning from time to time at least 4 times a year.
• Allow the dryer to cool down. Open the door, you might want to remove the lint filter so you
can access the sensor easier.
• Wipe the sensor with a damp cloth, remove any lint or fluff is there is any stuck to the sensor.
Do, not use any cleaning products when cleaning the sensor.
Logik 8 kgs Heat Pump Tumble Dryer LHP8W18 Manual.indd 21
12/02/2019 16:33
