6
Installation
Before installing the LEVCA, confirm that the model is compatible with the radio
battery you want to charge and the battery’s chemistry.
1. Select an area in the vehicle to mount the charger. The LEVCA’s compact size
allows it to be installed in areas where other in-vehicle chargers will not fit.
2. Run the DC power cable from the charger and connect it to the vehicle’s 12V
or 24V source. Fully insert the DC cable plug into the connection point on
the bottom of the charger, then rotate the plug slightly to lock it in place.
3. Place the battery in the charger to confirm it will properly charge. If there
are no issues, fasten the charger to the vehicle and secure the power cable.
