5
6. LOCAL/DISTANT BUTTON
Press Local/Distant (LO/DX) button for listening to weak stations. “LOCAL” indicator will appear
on the display. Press this button again (Distant mode) for normal operation.
7. EQUALIZER CONTROL
Press
EQ
to select between Off/Pop/Rock/Classic/Flat equalizer modes.
8. DISPLAY BUTTON (Set the Clock)
Selects radio frequency or clock display.
To set the clock:
1. With clock display selected, hold down (DISP) button until clock display starts flashing.
2. Rotate
VOL
VOL
to change minutes,
VOL
VOL
to change hours.
3. Press (DISP) button to start clock.
9. MODE / SUBWOOFER BUTTON
Press
MODE
to select between: AUX/TUNER/CD-MP3/USB or MMC/SD modes.
SUBWOOFER:
Press and hold the button to engage subwoofer output.
10. BAND SELECTOR / LOUDNESS BUTTON
Push this switch to select the desired band, either AM or FM.
LOUDNESS:
Press and hold the button to select LOUDNESS mode.
11. AUTOMATIC OR MANUAL TUNING (FREQ UP
OR FREQ DOWN
)
(A) RADIO MODE
When pressed for less than 1 second, these keys operate as SEEK Tuning mode.
When pressed longer than 1 second, they operate as MANUAL tuning mode.
If the keys are not pressed for 3 seconds, they will return to Automatic mode.
(B) CD/MP3/WMA PLAYER MODE
When pressed for less than 1 second, these keys operate as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 second, they will operate as CUE or REVIEW mode.
12. AUTOMATICALLY STORE STATIONS
Select six strong stations and store them in current band.
1. Select a band (if needed)
2. Hold
AS/PS
button for more than three seconds. The new stations replace stations already
stored in that band.
Preset Scan
Scan stations stored in current band
1. Select a band (if needed)
2. Hold
AS/PS
for more than one second but less than three seconds. Radio pauses for five
seconds at each station. Press
AS/PS
again to stop scanning when desired station is reached.
13. ‘SCAN’ AUTOMATIC TUNING CONTROL
This key operates RADIO SCAN. The operation is similar to normal search but holds 5 seconds
on every station detected in RADIO SCAN mode.
14. MUTE BUTTON
Press this button to mute the sound at once. Press again to return to previous volume level.
15. ACTIVE MATRIX DISPLAY
The Active Matrix Display will display the current state of the unit.
16. OPEN PANEL RELEASE BUTTON
Press
button and the front panel will open.
OPERATION
