12
Interleaved 2 of 5
Enable/Disable Interleaved 2 of 5
Set Lengths for Interleaved 2 of 5
Lengths for I 2 of 5 may be set for one discrete length or lengths within a specific range. The length of a code
refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains.
(Numeric barcodes are at the end of this manual. If you make an error, or wish to change
your selection, scan the CANCEL barcode. Single digit numbers must always be preceded by a
leading zero.)
One Discrete Length
- This option allows you to decode only those codes containing a selected length. For example, if
you scan
I 2 of 5 One Discrete Length
and then scan
1
,
4
, then the only I 2 of 5 symbols
decoded are those containing 14 characters.
Length Within Range
- This option allows you to decode a code type within a specified range. For example, to decode I
2 of 5 symbols containing between 4 and 12 characters, first scan
I 2 of 5 Length Within
Range
. Then scan
0
,
4
,
1
and
2
.
