11
5 COMMAND SETS AND CONFIGURATION
5.1
DOWNLOAD COMMAND SETS
The PDX3000/LDX9000/LTX9000 family of pole displays is controlled by command codes
and data from the computer. The pole display is able to emulate different popular command
sets to meet requirements of different POS software. Please download the required command
set to the display according to requirement of the POS software with the provided download
utility software.
The tool for download and the files containing the set of commands are available on our web
site at www.logiccontrols.com. Please download and unzip the files before installation.
See the description of the set of commands in < COMMAND SETS DESCRIPTION> section
to select one command set in “Select One of Command Sets” box for downloading:
EMAX – Emax command emulation
FIRICH = Firich command emulation
IEE – Iee command emulation
LCIGP – Logic Controls command set group (Factory Default)
PTC – PartnerTech CD7220/5220 command emulation
The utility program must be in the same folder as all command files.
1.
If the pole display is connected in USB socket, disconnect and connect again in USB
socket. Don't send any command to pole display until to transfer the new set
command.
2.
Run the software utility existent in the package.
Or, a USB device name interface selected in <Port Name>.
