background image

D O - I T - Y O U R S E L F

M O D E L 5 2 5

Mat Cutting Kit

Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com

2

Warranty

Logan Graphic Products, Inc. (“Logan”) warrants the Do-It-Yourself Mat Cutting Kit Model 525 to
be free from defects in parts and workmanship for a period of two years from the date of original
purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary
replacement parts found to be defective. Should the product need to be returned to Logan for
repair or replacement parts, authorization for any return must come from Logan in writing. Costs
of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan
shall not be liable for any damages or losses, incidental or consequential, direct or indirect, aris-
ing from the use of this product. This warranty extends only to the original purchaser and is not
assignable or transferable. This warranty is in lieu of all other warranties, expressed or implied.
Be advised that any Logan products purchased as “new” from an unauthorized dealer, such as an
online auction site or similar, may be void of their warranty.

L421N_525_manual_07.qxd:525_eng/eu manual_04.qxd  8/23/11  12:12 PM  Page 5

Summary of Contents for 525






Reviews: