LOG DIALOG, User Manual

Page: 8 / 11

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com
6
DIALOG
User Manual
Pairing the remote control
At factory settings, the remote control is not paired with the DIALOG. If you have several remote controls of the same
type, pairing is useful to avoid conflicts.
1. Use a pen or a straightened paper clip to press the pairing button on the back of the DIALOG
2. The device is now in pairing mode for
30 seconds
3. Now press any key on the desired remote control (e.g. the “ Mute “-key)
4. The device is now paired with this remote control and accepts only commands from this remote control
Note : If the DIALOG does not receive any command from a remote control during the 30 seconds it is in pairing mode,
the pairing is canceled and the DIALOG accepts commands from any remote control of the same type.
Wake-up function
In case of inactivity, the DIALOG automatically activates the standby mode after a while to avoid unnecessary power
consumption. The automatic wake-up functionality automatically reactivates the DIALOG when there is an incoming
audio signal via Bluetooth, AirPlay® or UPnP/DLNA. Accordingly, the loudspeakers can remain permanently connected
to the power connection without affecting the energy consumption or the lifetime of the product.
Sound optimization
In order to achieve an optimal sound experience, it is advisable to observe the following points:
- Place your DIALOG system on the wall or near a wall. Avoid placing the device in the middle of the room, as certain
frequencies are not sufficiently reproduced by the missing wall surface.
- Your DIALOG system offers a unique, lossless music reproduction. It is therefore advisable to play high-resolution
music files or uncompressed formats (such as WAV or Apple Lossless).
- Make sure your room has adequate acoustic damping. Too much reverb negatively affects the music signal.
Curtains, upholstered furniture or carpets can support good room acoustics and contribute to a pleasant damping.
- If possible, use the digital audio input of the DIALOG when connecting a third party device. The digital input provides
a better sound quality than analog inputs.
Note : There are no rules that apply to all environments. Nevertheless, it is advisable to consider the above points.