Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | [email protected] | www.logaudio.com
1
CUBE
User Manual
Delivered items
1 x CUBE
1 x Stainless Steel Front
1 x Power cable
Installation
- As an active speaker, the CUBE requires its own power supply. To do this, connect your CUBE speaker to your power
outlet with the delivered power plug.
-
The stainless steel front cover can be easily attached or removed by the magnetic fixation.
- Before placing the CUBE speaker on a stand or sideboard, make sure that it can support the weight of the speaker.
Also, make sure you have enough floor space to avoid tipping over. It is important to pay attention to the mass
center.
-
Due to the rear-mounted subwoofer, a sufficient distance to the wall (at least 15 cm) is required.
Connecting external audio sources
The CUBE speaker has both a digital and an analog connection to play audio signals.
Digital input with PROLOG
For maximum performance and lossless digital signal transmission, it is recommended to use a PROLOG Control Unit
(PROLOG 2, PROLOG 8) as source. To do so, connect your CUBE speaker to your PROLOG with an XLR audio cable. The
PROLOG 2 offers streaming (Bluetooth, AirPlay® and UPnP/DLNA), an optical digital input (TOSLINK) as well as analog
inputs (RCA) with a high-quality analog-to-digital converter.
Analog input
External, analog devices can be connected to the analog XLR input of the device.
Switching the inputs
Switching the inputs is not necessary with the CUBE. Both input signals (analog and digital) are played automatically.
Be careful not to accidentally play multiple sources at the same time.
Summary of Contents for Cube
Page 1: ...User Manual CUBE ...
