463-0620-01 Rev A. June-2015
4
620 Operation and Troubleshooting Guide
plus
CAN
®
AUXILIARY Engine Stop DISCLAIMER
This panel or harness may include an optional Auxiliary Engine Stop feature. The sole design intent
of the Auxiliary Engine Stop Feature is to provide for engine shutdown in the event of a key-switch
malfunction. The panel key/ lever switch should always be used as the primary engine shutdown
method.
Please note that the Auxiliary Engine Stop feature is NOT intended to function as the machine/
equipment Emergency Stop, or be purposed as an Emergency Stop for safety purposes. The machine
manufacturer must provide a separate Emergency Stop switch to meet safety mandates or emergency
machine shutdown functionality.
AUTO- Start DISCLAIMER
This panel/machine may be equipped with an automatic engine start-
up system that could result in the automatic starting and stopping of
the engine/ machine at any time. As such:
•
The engine may start without warning or notice.
•
It is SOLELY the responsibility of the owner/ installer/ operator to
provide warning labels, visible warnings, and audible warnings
to notify the operator of an impending start-up.
•
ALWAYS use lockout/ tag out procedures prior to performing
ANY service or configuration operations.
•
DO NOT configure operator programmable features while
the panel is in “AUTO” mode (Key in auto-start position). The
panel should be configured ONLY when the key is in the “Run”
position.
TYPICAL OPERATION:
1. Pull the AUX Engine STOP button “OUT” (away from the panel
face) to allow engine operation.
2. Push the AUX Engine STOP button “IN” (toward the panel face)
to initiate an AUXILLIARY Engine Stop.
NOTE: GENERAL EMISSIONS DISCLAIMER
This panel may include provision(s) for operator input such as FORCE REGENERATION, INHIBIT
REGENERATION, INTERLOCK, and others specific to US and International emissions regulations.
Responsibility for emissions related inputs and compliance with emissions regulations is solely that of
the owner and/or operator of the machine/ engine on which this panel is connected.
CAUTION: EXHAUST EMISSIONS COMPLIANCE/ AUTO-START DISCLAIMER
This panel is equipped with operator programmable parameters that could result in the automatic
starting and stopping of the engine/ machine. The engine/ machine, as a function of the emissions
system can/ could initiate, via the engine ECU, certain required emissions operations such as
regeneration of the DPF, or other emissions system maintenance, while the engine is running. The
owner/ operator of the engine/ machine is solely responsible for any adverse effects or damage to the
engine, engine emissions system, or other damage that could occur as a result of starting or stopping
the engine/ machine during any ECU initiated emissions event.