Loewe Universal Speaker ID, Operating Instructions Manual

Page: 4 / 9

- 4
Deutsch
English
Français
Italiano
Español
Nederlands
For your safety
For your safety and to avoid unnecessary damage to your TV set, please read
and observe the following safety instructions:
• Your Universal Speaker ID loudspeakers are designed exclusively for the
reproduction of audio signals.
Protect the loudspeakers from …
• Water, dampness, dripping or sprayed water or steam
• Knocks and mechanical stresses
• Magnetic and electrical fields
• Higher electrical powers than specified
• Cold, heat, direct sunlight and extreme temperature variations
• Dust
• Covering which obstructs air circulation
• Manipulations inside the set
Do not place objects containing liquids on top of the unit.
Candles and other open flames must be kept away from the
unit at all times to prevent the spread of fire.
Your Universal Speaker ID loudspeakers have been designed exclusively for
private domestic use. Warranty services cover this use for the intended purpose.
If you have moved the loudspeakers out of the cold into a warm environment,
leave them switched off for about an hour to avoid any possible formation of
condensation. Use the loudspeakers only when they have acclimatised to room
temperature. This avoids seriously damaging the components.
Installing the loudspeakers
Basic information
• Place the loudspeakers on a stable, flat surface or use the optional Loewe
wall mountings.
• Lay the speaker cables in such a way that they cannot be damaged.
• The speakers generate magnetic dispersion fields which act in the vicinity of
the housing. We recommend a minimum distance of > 0.5 m from magnet-
ically sensitive equipment such as CRT-TV sets, magnetic data media etc.
Loudspeakers
Use the wall mountings that we can supply as accessories, or position the spea-
kers at the appropriate height on pieces of furniture or shelves.
For the best possible audio experience the loudspeakers should be installed
symmetrically with respect to your sitting position - see the pictures on the
following page.
If this should not be possible, correct the level of the loudspeakers using the
Multiroom Receiver’s configuration menu.
Welcome Setting up