- 92
english
Troubleshooting
Problem
Possible cause
Remedy
Your TV set is not assigned an IP address if
you require the IP assignment type
DHCP
.
a) No DHCP server is working on your network.
Set up a DHCP server.
Assign the IP addresses for the TV set
manually
or via
UPnP
/DLNA.
Despite video or music file being played back,
no sound can be heard.
a) The TV set is set to mute or the volume has
been turned down too far.
b) An audio device that does not exist or that is
not connected is registered in the
TV menu
under
Connections
<
Sound components
(e.g.
HiFi/AV amplifier
).
a) Increase the volume by pressing the
V+
button
on the remote control for longer.
This will also cancel any mute setting.
b) Connect up the audio device and switch it
on.
In the
Sound components wizard
change
back to
TV speakers
.
Although the file is visible on the media
server, it is not displayed in the MediaPortal.
The file is not made available by your media
server.
Change to your media server. For this, read the
section Media server software on page 96.
A media file that is displayed can not be
played back.
The format of the file is not supported (see also
limitations in section
File formats supported
on
page 96).
No remedy.
Summary of Contents for Individual 26 Selection
Page 1: ...Operating instructions Connect TV Connect 26 LED...
Page 111: ...111...
Page 112: ...112...