Loewe BluTech Vision, Operating Manual

Page: 21 / 33

1 -
Angle Mark Display
A symbol for the availability of different camera angles (the angle mark) can be
displayed.
56
In the menu SETTINGS select the option PLAYBACK
SETTING .
Confirm OK .
56
Select the option ANGLE MARK DISPLAY .
Confirm OK .
MENU [PLAYBACK SETTING - ANGLE MARK DISPLAY]
SELECT ENTER RETURN EXIT
PARENTAL CONTROL
DISC LANGUAGE
WHEN PLAYING BACK A SCENE
RECORDED IN MULTI-ANGLE, THE ANGLE
MARK CAN BE DISPLAYED ON THE
SCREEN.
DISPLAY THE ANGLE MARK ON THE
SCREEN?
ANGLE MARK DISPLAY
PIN CODE SETTING
YES NO
34
Select the option YES .
Confirm OK .
Front Display/LED
The front and Blu-ray displays can be switched off independently of the standby
display (page 4).
56
In the menu SETTINGS select the option FRONT
DISPLAY/LED .
Confirm OK .
MENU [FRONT DISPLAY/LED]
SELECT ENTER RETURN EXIT
SELECT WHETHER YOU WANT THE FRONT DISPLAY AND LED
LIGHT ON OR OFF.
IF SELECTED OFF, BOTH THE FRONT DISPLAY AND LED LIGHT
WILL REMAIN OFF EXCEPT FOR THE POWER-ON LED LIGHT.
ON OFF
34
Select option OFF .
Confirm OK .
Version
The current software version can be displayed in the menu Settings.
Software update
When available, a software update can be uploaded via the USB interface on
the back with a USB stick. Please contact your specialist retailer for a software
update.
Factory Settings
You can reset the unit to the factory settings.
56
In the menu SETTINGS , select the option SYSTEM
RESET .
Confirm OK .
MENU [SYSTEM RESET]
SELECT ENTER RETURN EXIT
RESET CONTENTS OF ALL SETTINGS ON THIS UNIT?
RESET ALL SETTINGS BACK TO THE FACTORY SETTINGS
(EXCEPT FOR THE PIN CODE).
RESET NOT RESET
CANNOT RESTORE AFTER RESETTING.
34
Select the option RESET .
Confirm OK .
Switching video output
If you use the outputs HDMI OUT and COMPONENT VIDEO OUT as an alternative
to each other, you can switch between the two outputs.
Press the button HDMI (>1 and < 5 seconds).
The front display will flash and shows the output that is currently
set.
HD - out Output HDMI OUT is set.
CP - out Output COMPONENT VIDEO OUT is set.
Press the button HDMI and hold for at least 5 seconds so that
the output is switched.
Initial Set-up