13 -
Deutsch
English
Français
Italiano
Español
Nederlands
➠
The TV set must be equipped with an integrated digital multi-channel audio
decoder. If this has not been done at the factory, please consult your dealer
and ask them for the suitable Loewe upgrade kit.
You can connect the subwoofer either via an optional Audiolink cable or via the
optional upgrade module Wireless AudioLink wirelessly with a compatible audio
source.
If you connect the subwoofer via the Audiolink cable, install it with the 25-pole
connector at the Loewe TV set and at the subwoofer (socket Audiolink
2
).
Cabling for Loewe TV set (L27xx/SL1xx) - Loewe subwoofer - loudspeaker
Audiolink cable
Connection
Loewe TV set (L27xx - SL1xx)
Loewe subwoofer
Mains cable
Connect the speaker cable to the speaker according to the appropriate instal-
lation instructions. One of the two wires of the speaker cables is usual marked
black. Connect this black marked cable to the black screw terminal on the
subwoofer
8
(connection diagram, see figure below) and the black terminal
on the speaker. Turn the screw connection of the respective terminal on the
subwoofer anticlockwise about 5 turns. Feed the wire end into the screw termi-
nal (top right-hand side) and close the screw terminal by turning it clockwise.
Connect the unmarked wires to the red terminals.
Use the mains cable supplied to connect the 220-240 V socket
9
of the sub-
woofer to a 220-240V 50/60 Hz socket.
Front
left
Front
right
Center
Rear
left
Rear
right
Summary of Contents for Audiodesign 525
Page 2: ......
Page 3: ...Subwoofer...
