Inst.0383 LODORE Wireless Diving Board Waterfall V08_16
3
1.
Confirm the following dimensions of diving board (See Figure A):
a)
Dimension 1 (D1): Length from water end to pool edge;
b)
Dimension 2 (D2): Length from water level to board underneath.
2.
Cut off the tube of length according the following formula:
D1 + D2 + 6 inches
3.
Take off the board and put it on the ground with bottom face upside.
4.
Connect the flexible pipe with DB-4
Cascade and mini pump. Affix it by
clamp (See Figure B).
5.
Use clamp and screw to affix the
flexible pipe on the position of the
board right above pool edge (point
marked . And then affix the
flexible pipe and DB-4 Cascade on the bottom face of the board with silicon. (See Figure C).
Figure C
6.
Install the board back to the deck. Make sure the mini pump is submerged into.
7.
Connect the Mini Pump with the Wireless Control Unit through the Transformer (See Figure
E).
Figure B