External Control Connector
Emergency Stop
Network (Proprietary Lode)
Class I MEDICAL EQUIPMENT Type B Electrical Safety IEC 60601-1
Safety notes
Potential Equalization Conductor
RS232
1. If your device has an RS232 or USB port, connect it directly to the PC LEM is installed on. If your
device has a RJ45 connector plug it with an UTP cable to the special interface connector that was
delivered with your device and to a USB port in your PC.
2. Start Lode Ergometry Manager on your PC
3. If your device has a control unit, select “Terminal”- mode to allow external command. If your device
does not have a control unit the terminal mode is automatically selected. (See for detailed instructions
the user manual of LEM).
Trapping zone. Warning: do not jump onto the rotating belt. Do not jump
off the rotating belt (not even to the front). Do not stop moving on the
running belt. Do not turn around on the running belt. Do not move
sideways or backwards. Do not make movement that could get you out
of balance. Keep away from rollers. The operator must keep away from
the footrail while lowering.
12 - List of symbols used
13/21
M938904_MANUAL VALIANT 2 PEDIATRIC / VERSION: V1.1 - 2016-08-25
