1.3 For your safety
For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.
Damage to the power cord or the housing can result in live voltage.
Check the power cord and the unit before each use.
If the power cord or the unit is damaged, do not operate!
Replace a damaged power cord with a new one.
The unit may be opened and repaired only by an authorized Henkel service
representative.
Improper handling of Loctite® brand products may be hazardous to ones health!
Observe general safety regulations for the handling of chemicals!
Observe manufacturer’s instructions! Request a safety data sheet for the
product used!
Always wear goggles, when operating with pressurized air!
1.4 Usage
The Loctite® SD10 Digital Syringe Dispenser (1514629) is a self-contained
dispenser system and suitable for the precise application of Loctite® brand
products at manual workstations such as in workshops, laboratories and industrial
installations. It is designed for a small volume applications of Loctite® brand
anaerobic, UV curing and gel cyanoacrylate adhesives as well as Loctite® brand
chipbonder® adhesives or soldering flux.
