Loctite 98413 Operation Manual Download Page 10

 

9 Warranty 

 
Henkel expressly warrants that all products referred to in this Instruction Manual for the ZETA

® 

7411-S UV 

Flood Curing System 98413 (hereafter called “Products”) shall be free from defects in materials and 
workmanship. Liability for Henkel shall be limited, as its option, to replacing those Products which are 
shown to be defective in either materials or workmanship or to credit the purchaser the amount of the 
purchase price thereof (plus freight and insurance charges paid therefor by the user).  The purchaser’s sole 
and exclusive remedy for breach of warranty shall be such replacement or credit.

 

 

A claim of defect in materials or workmanship in any Products shall be allowed only when it is submitted in 
writing within one month after discovery of the defect or after the time the defect should reasonably have 
been discovered and in any event, within (12) months after the delivery of the Products to the purchaser.  This 
warranty does not apply to perishable items, such as UV lamp, work surface pad, fuses, etc. No such claim 
shall be allowed in respect of products which have been neglected or improperly stored, transported, handled, 
installed, connected, operated, used, or maintained. In the event of unauthorized modification of the Products 
including, where products, parts or attachments for use in connection with the Products are available from 
Henkel, the use of products, parts or attachments which are not manufactured by Henkel, no claim shall be 
allowed. 
 
No Products shall be returned to Henkel for any reason without  prior written approval from Henkel.  
Products shall be returned freight prepaid, in accordance with instructions from Henkel. 
 
NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED, MISUSED, 
NEGLECTED, OR DAMAGED BY ACCIDENT, OR IF THE SYSTEM WAS USED TO DISPENSE ANY 
LIQUID MATERIAL OTHER THAN LOCTITE

®

 PRODUCTS.   

 
EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, HENKEL MAKES NO 
WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO THE 
PRODUCTS. 
 
ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND 
OTHER WARRANTIES OF WHATEVER KIND (INCLUDING AGAINST PATENT OR TRADEMARK 
INFRINGEMENT) ARE HEREBY DISCLAIMED BY HENKEL AND WAIVED BY THE PURCHASER. 
 
THIS SECTION SETS FORTH EXCLUSIVELY ALL OF  LIABILITY FOR HENKEL TO THE 
PURCHASER IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF DEFECTIVE 
PRODUCTS. 
 
WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE UNDER 
APPLICABLE LAWS, HENKEL EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER FOR 
ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN CONNECTION WITH THE SALE OR 
USE OF, OR OTHERWISE IN CONNECTION WITH, THE PRODUCTS, INCLUDING, WITHOUT 
LIMITATION, LOSS OF PROFITS AND SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, 
WHETHER CAUSED BY  NEGLIGENCE FROM HENKEL OR OTHERWISE. 

Summary of Contents for 98413












Reviews: