background image

8 Documentation 

(Continued) 

 

8.3 Wiring 

Diagram 

   

9 Warranty 

 
Henkel expressly warrants that all products referred to in this Instruction Manual for The 300 ml Cartridge Pusher 
98022 (hereafter called “Products”) shall be free from defects in materials and workmanship. Liability for Henkel 
shall be limited, as its option, to replacing those Products which are shown to be defective in either materials or 
workmanship or to credit the purchaser the amount of the purchase price thereof (plus freight and insurance 
charges paid therefor by the user).  The purchaser’s sole and exclusive remedy for breach of warranty shall be such 
replacement or credit.

 

 

A claim of defect in materials or workmanship in any Products shall be allowed only when it is submitted in 
writing within one month after discovery of the defect or after the time the defect should reasonably have been 
discovered and in any event, within 12

 

months after the delivery of the Products to the purchaser. No such claim 

shall be allowed in respect of products which have been neglected or improperly stored, transported, handled, 
installed, connected, operated, used or maintained. In the event of unauthorized modification of the Products 
including, where products, parts or attachments for use in connection with the Products are available from Henkel, 
the use of products, parts or attachments which are not manufactured by Henke, no claim shall be allowed. 
 
No Products shall be returned to Henkel for any reason without  prior written approval from Henkel.  Products 
shall be returned freight prepaid, in accordance with instructions from Henke. 
 
NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED, MISUSED, 
NEGLECTED, OR DAMAGED BY ACCIDENT, OR IF THE SYSTEM USED TO DISPENSE ANY LIQUID 
MATERIAL OTHER THAN HENKEL PRODUCTS.   
 
EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, HENKEL MAKES NO 
WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO THE 
PRODUCTS. 
 
ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND OTHER 
WARRANTIES OF WHATEVER KIND (INCLUDING AGAINST PATENT OR TRADEMARK 
INFRINGEMENT) ARE HEREBY DISCLAIMED BY HENKEL AND WAIVED BY THE PURCHASER. 
 
THIS SECTION SETS FORTH EXCLUSIVELY ALL OF  LIABILITY FOR HENKEL TO THE PURCHASER 
IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF DEFECTIVE PRODUCTS. 
 
WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE UNDER 
APPLICABLE LAWS, HENKEL EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER FOR ANY 
DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN CONNECTION WITH THE SALE OR USE OF, 
OR OTHERWISE IN CONNECTION WITH, THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, 
LOSS OF PROFITS AND SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER CAUSED 
BY  NEGLIGENCE FROM HENKEL OR OTHERWISE. 

 
 

 

9

Summary of Contents for 98022











Reviews: