12
Advance Mode: Operator needs to define STEP, INTENSITY and TIME. Also CYCLE Number
and Step Number is necessary here.
For example, if operator have defined as below, when start signal comes, LED head will run
as blow flow and runs 2 cycles. See chart on next page.
Step
Intensity Time
No.1
10% 2.0 s
No.2
20% 2.0 s
No.3
30% 2.0 s
No.4
40% 2.0 s
No.5
50% 2.0 s
No.6
60% 2.0 s
No.7
70% 3.0 s
Cycle No.
7
Step No.
2
2.
Restore factory setting.
3.
To Language Selection page.
4.
Save Setting: Save changes.
5.
Exit Without Saving: Quit this page without saving.
6.
Link Button: The linked LED head will turn on with start signal.
7.
Intensity & Timer setting. When clicked, can enter below page to set intensity and timer:
Level Mode:
Summary of Contents for 2257357
Page 1: ...1 2257357 EQ CL30 LED Quad Controller Operating Manual ...
Page 13: ...13 Timer Mode Advance Mode ...
Page 17: ...17 10 Diagrams XS1 Start ...
Page 18: ...18 XS9 PLC Interface ...
