Short Throw (13mm)
Long Throw
(24mm)
2. Setting Deadbolt Projection
• Before fixing the lock into the stile, select the correct deadbolt throw.
• To restrict the throw to 13mm select S
• To restrict the throw to 24mm select L
• Ensure the arrow is pointing to the desired throw application.
4. Fixing Furniture and Cylinder
• Insert the drive bar (spindle) through the square
drive hole in the lock
• Place the furniture onto the drive bar. For security,
ensure the interior handle is on the inside of the
house
• Place the cylinder through the cylinder hole
• Fix cylinder using the supplied M5 cylinder fixing
screw as supplied
• Fix together the furniture using the two M4
furniture fixing screws. See screw selection chart
to determine correct screw length
Note:
If fixing Palladium Xtra Furniture with
daylatch snib, refer to separate Palladium Xtra
Furniture instructions enclosed.
3. Fixing Lock
• Place the lock assembly into the stile
• Fix the lock onto the stile using the two 8g x 7.5 screws
Note:
When lock has 13mm projection selected the key must be rotated once
deadlock. When lock has 24mm projection selected the key must be rotated twice
to deadlock.
