INSTRUCTION MANUAL
STEP 5. Transportation.
- A fully laden iQ Traveler 16 with 16 devices and accessories weighs over 20kg and therefore should
be lifted only by two or more persons.
- Before moving ensure all four latches are completely closed. The air vent should be kept firmly
closed and only released if the iQ Traveler 16 is subject to large changes in air pressure e.g. on an
aeroplane.
- For mobility the iQ Traveler 16 is fitted with a retractable handle and smooth running castors.
Simply lift the iQ Traveler 16 onto the castor end and extend the handle, then it can be easily
wheeled to the chosen operating area.
- When opening ensure the iQ Traveler 16 is laying down (label facing upward) so that nothing falls
out when the lid is opened.
Note: Refer to the specifications diagram for an illustration.
STEP 6. Security.
- The iQ Traveler 16 can be locked using one or two padlocks secured through the locking hole.
Note: Refer to the specifications diagram for an illustration.
STEP 7. Other features.
- The iQ Traveler 16 has a dust and water resistant seal in between the lid and the case body. If
this seal is damaged replace immediately to continue protection against dust and water. The seal
requires no maintenance other than cleaning with a damp cloth if it gets dirty – do not use chemical
cleaners.
- The castors are ball-bearing type and require no maintenance.
- Three folding handles allow the case to be picked up by more than one person.
STEP 4. Charging and Syncing.
- Carefully read the User Instructions for the iQ 16 SCB before attempting to charge or sync your
iPad devices.
- Remove the devices, iQ 16 SCB and cables and place on a stable surface. Attach the power cable,
USB host cable and the 30 Pin USB cables. Place the devices in the desktop stands provided.
- Connect a power cable to the power socket to charge. If syncing, also connect the host cable to the
Macbook. Follow the User Instructions for the iQ 16 SCB for syncing and charging.
Note: The devices and the iQ 16 SCB can get quite warm during charging and it is strongly
recommended these are not operated inside the foam.