STEP 2: ADJUSTING THE BOLT
If the latch holes are centered in the drilled
hole, no adjustment is needed.
If NOT, adjust the latch as shown below.
Push toggle button "A"
downwards and pull part "B"
outwards.
Initial position of A: 2-3/8"
Pull "C" to 2-3/4" and release
button "a". Now the backset
has been adjusted to 2-3/4".
3
1
2
2-3/8"
B
A
C
2-3/4"
2-3/4"
Adjust as shown below (as needed)
