4.7 Safe Mode - Overview
SECTION 4.7
Lockly
will enter
Safe Mode
when three (3) consecutive wrong
Access Codes
are entered within
5 minutes. When in
Safe Mode
, the lock status icon will start to flash.
To disable
Safe Mode
, you must unlock the door using the correct fingerprint or enter the correct
Access Code
twice in a row. Activate the keypad by pressing and holding for 3 seconds.
Once the screen is activated, enter the correct
Access Code
carefully twice, pressing after
every time.
If you enter the wrong code, the keypad will then be disabled for
10 minutes
.
Countdown Prompt
(Displayed in Minutes)
Will start with 10 and
countdown until 0.
You will see a
“10”
on the screen, notifying the number of minutes that the keypad is disabled for.
After
10 minutes
, you may attempt to enter the correct
Access Code
to unlock the door. After the
second incorrect attempt to unlock the lock with the wrong
Access Code
, Lockly will disable the
keypad for
20 minutes
, displaying a
“20”
on the screen. After the third wrong attempt to unlock the
door with the correct
Access Code
, the screen will be disabled for
30 minutes.
(Example A and
Example B above).
Note:
In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You
can reactivate the screen by sliding your hand across the screen.
Example A
Example B
23
