C
13
INSTALLING THE LOCK (EXTERIOR)
Step 4
continued
Check lock alignment and
ensure that it is sitting flat and
aligned straight.
5
6
7
8
Exterior
Exterior
Ensure
E
is securely installed on the correct
position, then insert
E
to top door hole,
passing through below part
J
E
B
While aligning the lock straight up-and-down, pass
the wiring cable under the latchbolt
F
then ensure
the Slotted Barrel Extension
E
passes through the
hole on the lower part of the deadbolt
J
body as
shown.
Pass the spindle
C
through the center
of the latchbolt, and the round rods
through the sides in their respective
holes.
The cable should run underneath
the lockset.