LockeyUSA
|
PO Box 543, Mt Pleasant, MI 48858
|
www.LockeyUSA.com
TB-950 Magnum Instructions
1
Lockey®TB-950 Magnum
Concealed, high use, pedestrian gate closer
(with individual hydraulic controls for closing & latching speeds)
Installation Instructions
The Lockey TB-950 Magnum pedestrian gate
closer is an all-in-one closer and hinge system
which is designed for installation on high use
gates.
With the closer unit concealed inside a strong
steel housing, the Lockey TB-950 Magnum is
tamper and vandal resistant.
Installation of the Lockey TB-950 Magnum is
normally done when the gate is being fabricated,
but can be done afterwards, if required. The
closer housing and bottom support are welded to
the bottom of the gate and post, and the closer
top pivot is welded to the top of the post. When
the closer housing, bottom support and top pivot
are welded to the gate and post, they can be
galvanized/painted along with the gate and posts.
Whether the closer is for use with a lock, latch or
electromagnet, the two hydraulically controlled
speed adjustments will give the correct closing
speed. There is one control to adjust the closing
speed, the other regulates the latching speed.
Both controls are hidden underneath the gate
closer housing and can be easily adjusted with an
Allen key.
The gate closer housing includes a mechanical
stop which restricts the opening of the gate to
avoid damaging the closer. The closer can be set
for right or left hand without any additional parts
or fabrication work.
Limited maintenance is required, only regular gate
inspection and periodic lubrication.
Features
Fits gates 40 - 48” wide & up to 72” high
Suitable for gate weight up to 240lb
No hold open (suitable for security gates)
Hydraulically adjustable closing speed
Hydraulically adjustable latching speed
Restrictor to avoid over opening
Speed adjustments hidden from view
For all temperatures down to -40°F
