background image

CONGRATULATIONS 

 

You have invested in the best implement of its type on the market today. 
 
The care you give your Locke Turf implement will greatly determine your 
satisfaction with its performance and its service life.  We urge a careful 
study of this manual to provide you with a thorough understanding of 
you new implement before operating, as well as suggestions for opera-
tion and maintenance. 
 
If your manual should become lost or destroyed, Locke Turf will be glad 
to provide you with a new copy.  Order from Locke Turf, 307 Highway 
52E, Opp, Alabama 36467. 
 
As and Authorized Locke Turf dealer, we stock genuine Locke Turf parts 
which are manufactured with the same precision and skill as our original 
equipment.  Our trained service personnel are well informed on meth-
ods required to service Locke Turf equipment, and are ready and able to 
help you. 
 
Should you require additional information or assistance, please contact 
us. 
 
 

 

 

 

 

 

YOUR AUTHORIZED  

 

 

 

 

 

 

LOCKE TURF DEALER 

 
 
 
 

 

BECAUSE LOCKE TURF MAINTAINS AN ONGOING PROGRAM  

 

 

OF PRODUCT IMPROVEMENT, WE RESERVE THE RIGHT TO MAKE  

 

 

IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS 

 

 

WITHOUT INCURRING ANY OBLIGATION TO INSTALL THEM 

  ON 

UNITS 

PREVIOUSLY 

SOLD. 

 
 

 

BECAUSE OF THE POSSIBILITY THAT SOME PHOTOGRAPHS 

 

 

IN THIS MANUAL WERE TAKEN OF PROTOTYPE MODELS,  

 

 

PRODUCTION MODELS MAY VARY IN SOME DETAIL.  IN ADDITION,  

 

 

SOME PHOTOGRAPHS MAY SHOW SHIELDS REMOVED FOR PUR 

  POSES 

OF 

CLARITY. 

 

NEVER OPERATE

 THIS IMPLEMENT WITHOUT 

 

 

ALL SHIELDS IN PLACE.

 

Summary of Contents for GT-122













Reviews: