background image

SAFETY DECALS 

To promote safe operation, Locke Turf supplies safety decals on all products manu-
factured.  Damage can occur to safety decals either through shipment, use or recon-
ditioning, so Locke Turf will, upon request, provide safety decals for any of our prod-
ucts in the field at no charge.  Contact your authorized Locke Turf dealer for more 
information. 

ROTARY CUTTERS MAY

DISCHARGE OBJECTS AT

HIGH SPEEDS, WHICH

COULD RESULT IN SERIOUS

INJURY TO BY-STANDERS

OR PASSERS-BY.

WARNING

TO AVOID

SERIOUS INJURY OR DEATH, 

READ OPERATOR'S MANUAL BEFORE

OPERATING & FOLLOW ALL PRECAUTIONS.

(CONTACT DEALER FOR MANUALS)

KEEP CHIELDS AND GUARDS IN PLACE.
KEEP CLEAR OF DRIVES AND BELTS.

BE CAREFUL ON UNEVEN TERRAIN.
DECREASE SPEED WHEN TURNING.

DO NOT OPERATE MOWER IN TRANSPORT POSITION.

LOWER IMPLEMENT, STOP ENGINE AND
REMOVE KEY BEFORE DISMOUNTING.

SECURELY SUPPORT MOWER & REMOVE
KEY BEFORE WORKING UNDERNEATH.

NO RIDERS.  DO NOT OPERATE MOWER IN 

VICINITY OF OTHER PERSONS.

KNOW HOW TO STOP TRACTOR AND 
EQUIPMENT QUICKLY IN AN EMERGENCY.

CLEAR MOWING AREA OF DEBRIS

ALLOW NO CHILDREN OR UNQUALIFIED 

PERSONS TO OPERATE EQUIPMENT.

WARNING

CAUTION

THIS IMPLEMENT IS DESIGNED TO OPERATE 
AT 540 RPM MAXIMUM TRACTOR PTO SPEED.

ALL DRIVE LINE SHIELDS MUST BE KEPT IN 

PLACE.                                               

60873

DO NOT OPERATE MOWER WITHOUT DISCHARGE 
SHIELD OR DEFLECTOR IN PLACE AND GOOD REPAIR.

83056

TO AVOID SERIOUS INJURY OR DEATH, 

94878

83343

82619

50012615

82618

50012616

82617

60873

83056

CAUTION

ALL AIR MUST BE PURGED 

FROM HYDRAULIC SYSTEM 
BEFORE ATTEMPTING TO 
RAISE OR LOWER THIS 
MACHINE.  REFER TO 
OPERATOR'S MANUAL FOR 
FURTHER DETAILS.

94878

94878

AL

L A

IR

 MUST

 B

E PU

RG

ED

 

FR

OM

 HY

DRAU

LIC SY

STEM 

BE

FO

RE

 AT

TEM

PT

IN

G TO

 

RA

ISE OR L

OWE

R T

HIS

 

MACH

IN

E.  RE

FER

 TO

 

OPERATOR'

S M

AN

UA

L F

OR 

FURT

HE

R DET

AIL

S.

CAUTION

WARNING

TO AVOID SERIOUS INJURY OR DEATH:

LOCK WINGS UP FOR TRANSPORT

INSTALL TRANSPORT LOCK PINS

READ OPERATOR'S MANUAL FOR 
INSTRUCTION

83343

DANGER

KEEP AWAY - ROTATING BLADES

SERIOUS INJURY OR DEATH CAN RESULT FROM

THROWN OBJECTS OR BLADE CONTACT.

DO NOT STAND ON OR NEAR MACHINE WHEN IN OPERATION
DO NOT OPERATE WITH DEFLECTORS OR GUARDS REMOVED
ROPS (ROLLOVER PROTECTIVE SYSTEM) AND SEAT BELT EQUIPPED TRAC-
TOR IS RECOMMENDED FOR OPERATOR USE IN ALL MOWING OPERATIONS

WARNING

ROTATING DRIVE PARTS

           BENEATH

ENTANGLEMENT WITH ROTATING
DRIVE PARTS CAN CAUSE INJURY OR
DEATH
DO NOT OPERATE WITHOUT THIS 

AND ALL OTHER SHIELDS IN PLACE
AND IN GOOD CONDITION

WARNING

DO NOT OPERATE CUTTER IN VICINITY OF
OTHER PERSONS.

KEEP ENCLOSED SIDES, PERMANENT
BANDS, BELTING, HIGHWAY CHAINS OR 
OTHER FACTORY APPROVED DISCHARGE
SHIELDS IN PLACE AND IN GOOD REPAIR.

82618

DANGER

KEEP AWAY!

SHIELD MISSING FROM THIS AREA

TO AVOID SERIOUS INJURY OR DEATH
DO NOT OPERATE WITHOUT THIS AND 
ALL OTHER SHIELDS IN PLACE AND IN

GOOD CONDITION

50012616

16 

Summary of Contents for Finish Pro FP-3132



























Reviews: