62
11
Operating information
Enter the installer password
To enter the installer password, use the
▲
and
▼
buttons to
change the value of the fi rst digit to 5, then press
►
to move
to the next digit. Repeat this process to fi ll in the remaining
digits and enter the password 5-3-0-9. Once the fi nal digit has
been entered, press the
►
button to access the installer menu.
Entering the installer password will allow future access to the
installer menu without requiring the password for up to an
hour aft er the last button is pressed.
Installer main menu
Th
e Installer Menu is arranged in a menu/sub-menu structure
to help with navigation to the desired settings. Th
e installer
main menu gives a list of available sub-menus.
Parameters in the installer menu:
- GENERAL
Submenu
• MAX SH SETPT – also found in OUTDOOR RESET
Sub-menu
• MAX DHW SETPT
• AUTO RESET HI LIMIT – also found in Set Points
Menu
• MAN. RESET HI LIMIT – also found in Set Points
Menu
• SH MAX RATE LIMITING
-
OUTDOOR RESET Sub-menu
• SH SETPT (COLD DAY) – also found in Set Points
Menu
• MAX SH SETPT – also found in GENERAL Sub-menu
• OUTDOOR TEMP COLDEST
• WARM WEATHER SHUTDOWN
•
SHIFT
RESET
• OUTDOOR TEMP – WARM
• SH SETPT (WARM DAY)
- TIME/DATE
Sub-menu
- FAULT
LOG
-
SETPOINTS Sub-menu – Set Points Menu duplicate
• SH SETPT (COLD DAY)
•
DHW
SETPT
•
TEMPERATURE
UNITS
- CASCADE
Sub-menu
•
CASCADE
ADDRESS
• CASCADE TYPE – only available if address is 0
• Boiler size settings – only available if address is 0
-
ADVANCED COMBI Sub-menu
• DHW RESPOND TIME
• PRE-HEAT – (ENABLED/DISABLED)
-
SET-UP WIZARD – Access Set-up Wizard after it has been
completed.
Installation & Service Manual
Figure 11-3 Installer Main Menu
Button functions in the installer main menu
▲
/
▼
- Move the cursor through the list of available sub-
menus.
►
- Access the currently selected sub-menu.
◄
- Save changes and exit the menu.
To exit the menu without saving changes, you must cycle
power to the unit before exiting the menu.
Button functions in the installer sub-menus
▲
/
▼
- Change value of current parameter.
►
- Move to next parameter or return to main menu
on last parameter in the sub-menu.
◄
- Return to Main Menu or save all changes and return
to Home Screen on the last parameter in the sub-
menu.
To exit the menu without saving changes, you must cycle
power to the unit before exiting the menu.
Note:
Certain settings in the Installer Menu can be accessed
in multiple sub-menus for ease of navigation. Th
e Installer
Menu also contains settings that can also be found in the Set
Points Menu to allow full programming of the boiler within
the Installer Menu.
F I R E T U B E C O M B I
™
