4
4
Leaks
-Seals worn out or damaged.
-Some parts may be cracked or
worn out.
-Replace seals with new ones.
-Check and replace with new
ones.
5
The forks
without
lowered.
descend
being
-Impurities in the oil cause the
discharge valve (B) to fail to
close.
-Air in the oil.
-Seals worn or damaged.
-Discharge valve (B) is out of
adjustment.
-Replace with filtered oil.
-Expel the air.
-Replace with new ones.
-Adjust
the
setting
(P50H).
screw
7. WEIGHINGOPERATION
7.1
Put the control lever in the LOWER position and lower the truck to lowest position.
7.2
Press the
key to turn the system on. After the start-up sequence the indicator will display the weight.
7.3
Weighing method for gross weight::
Press the ZERO key to set the gross weight to 0. Put the forks under the pallet and check that the load
is properly balanced. Put the control lever in the ASCENT position, pump the handle to make the forks
rise until the pallet has left the ground. When the indicator is stable, the gross weight of the goods (total
weight of the pallet and the goods) is shown.
7.4
Weighing method for net weight:
To display the weight of the goods without the weight of the pallet (or other container):
7.4.1 Weigh single standard pallet, for example: weight of pallet: 40kg.
7.4.2 Press the ZERO key, the indicator will display “0kg”.
7.4.3 Remove the pallet from the forks, the indicator will display “-40kg”.
7.4.4 Weigh the goods on the pallet as shown in 7.3, when the indicator is stable, the net weight of the goods
is shown.
7.5
Switch between kg and lb.
When the weight is shown in kg’s, Press on the ZERO key will soon be kg to switch to the pound.
Press on the ZERO key again and the unit shown will switch back to kg.
7.6
Turn off the Indicator
Press on the ON
／
OFF key until the indicator displays “OFF ”. Releasing the key will turn off the
indicator.
8. BATTERYPOWERDATAANDREPLACEMENT
8.1
How to change batteries:
8.1.1 Loosen the screws on the battery cover and remove the cover.
8.1.2 open the screw on battery and pull out battery ,out the socket.
8.1.3 put the new battery and insert the socket.
8.1.4 Screw the battery cover plate back into position.
