3
loadstarsensors.com
User Guide
3.
Connect the wires as show in the image below
o
Note the Load Cell connection is almost always as shown except in special cases such as
RRP1. In such a case please refer to the loadcell wiring for the correct colors.
4.
Switch the number 2 switch to the on position.
o
# 1 Switch – Turn on if you wish the Output to be 0-10 V. By default it is in the 0 -5 V range.
o
# 2 Switch On allows the zero level to be adjusted with more resolution. Keep it On.
