14 Additional Data
26
14 Additional Data
If this feature is enabled, the LR810 allows you to enter three numbers
which provide additional information to the weight data.
Each number has a label to identify it. The specific labels for your LR810
are set up at installation time.
Typical labels might be, for example:
Customer number
Truck number
Docket Number
When you press the DATA key, the LR810 displays the three labels in
sequence and you can enter the relevant numbers for the current load. The
numbers can be up to 8 digits long.
If you have the appropriate equipment installed, this information can be
stored in the data logger and / or printed with the weight data.
>>>>
To enter additional data numbers
(This explanation uses the example labels above)
1.
When the LR810 is Ready, press
DATA
.
The LR810 displays the first label and prompts you to enter a number.
2.
Enter a number (up to eight digits) and press
ENT
.
The LR810 displays the second label and prompts you to enter a
number.
3.
Enter a number and press
ENT
.
4.
Enter the third number in the same way.
The LR810 returns to the Ready state.
Note
If you have an on-board computer, the third number can be altered remotely
from the computer or made to increment automatically when the CLEAR
key is pressed.
Note