Configuration
[PH] BAND button to access menu. Cursor is at the top/
left of CW Delay (Default).
While in Menu Mode, TAP MODE button until cursor is
on CW Mode. Turn VFO knob to select Auto (Paddle) or
Manual (Straight-Key).
Tap MODE button to CW Fre. Turn VFO knob to set side
tone adjustment (normal 0700 Hz).
Tap MODE button to CW Vol. Turn VFO knob to adjust
volume.
Tap MODE button to CW Delay. Turn VFO knob to 0.2S
(best operation).
Advance thru menu pages by tapping MODE button
until CW Key. Turn VFO knob to change to Paddle
reverse (1 Dash on Left, 2 Dits on Left)
Tap MODE button to reach second page of Menu.
Make NO adjustments on items “R BFO” - “REF 2”.
Tap MODE button to CW Key. Use VFO to change
between “mode 1” and “mode 2”. This is for Key
Reverse.
Tap M/V button to exit menu mode.
Memory Storage
The FX-4A has 10 memory stores per each of the 4
bands. To access, TAP the M/V button. “CH 00” and
Mode will be displayed in the top left corner of the
display. Rotate VFO knob to change memory storage
location number. The setting begins at CH00 and goes
through CH09 and then will roll to next band.
To Store Frequency, [PH] M/V button and an * (asterisk)
will appear right of “Mode”. Select Frequency to be
stored then tap M/V to exit and save.
