The LMP Bluetooth Keypad won't connect to the Mac via Bluetooth anymore.
While the Bluetooth connection generally is stable even throughout occasional system
updates, it can happen that the Bluetooth thread is damaged in the course of an update (i.e.
OS X version update or within the same version to new release). The user may not even
notice that the Mac actually has updated if it is set to automatic update function.
You should try to re-install the LMP Bluetooth Keypad from scratch:
Remove all entries of "Bluetooth Keypad" in your Bluetooth preferences by selecting them
and press "-" or "x".
Switch off your Mac.
Switch off your LMP Bluetooth Keypad
Start up your Mac and shut it down again.
Turn on your LMP Bluetooth Keypad.
Start up your Mac and open Bluetooth in the system preferences.
Press the "+" to pair the LMP Bluetooth Keypad (Mac OS X 10.5 to 10.8). Press ”Continue”. If
you use OS X 10.9 and higher, the Bluetooth assistant automatically searches for new
Bluetooth devices. The Mac searches for a new Bluetooth device now.
Turn the LMP Bluetooth Keypad upside down and press the small black pairing button on the
reverse side with a pen.
The Bluetooth assistant should see the LMP Bluetooth Keypad. It will display an 8-digit code
(Mac OS X 10.5 to 10.8) or a 6-digit code (Mac OS X 10.9 or higher).
- Enter the 8 digits or 6 digits respectively on your Keypad and press the key "enter" on your
Keypad.
Note: The numbers will not be high-lighted as it may be with other Bluetooth devices!
The LMP Bluetooth Keypad should be connected now. In the Bluetooth assistant, you see
"Bluetooth Keypad - connected".
The LMP Bluetooth Keypad does not work with Bootcamp.
You may use the LMP Bluetooth Keypad with Bootcamp and Windows OS although the LMP
Bluetooth Keypad was specifically made for Mac OS and it is stated on the package that
Windows OS is not officially supported. However, you can pair the LMP Bluetooth Keypad
under Mac OS X and then start up with Bootcamp and Windows or you follow the pairing
instruction in Windows for pairing new Bluetooth devices.
If necessary, you may re-install the LMP Bluetooth Keypad from scratch (see above).
The LMP Bluetooth Keypad shows erratic behaviour such as sudden loss of connection or
"connection lost".
Erratic behaviour and the loss of connection can be the result of low battery power. Turn off
the LMP Bluetooth Keypad, change the batteries and turn on the LMP Bluetooth Keypad
again.
