Installation
Fully charging the LMP Wireless Keyboard before initial use is highly recommended
1.
Use the USB-C cable to charge the WKB-1243 (
).
2.
You may use any USB-C port of your Mac or any standard 5V USB power supply (e.g. iPhone's power supply) to charge the
WKB-1243. The Mac must be turned on in order to provide power via its USB-C port to the WKB-1243!
3.
When fully charged, the LED will become solid green (
).
4.
Turn on the WKB-1243 by switching the power switch to the "On" position (
).
5.
Pair the WKB-1243 to a Bluetooth enabled host by following the pairing instructions.
To preserve battery energy, turning the keyboard off during the weekend or storage is highly recommended.
Pairing the LMP WKB-1243 Wireless Keyboard
Ensure that your Mac or iPhone/iPad has OS X 10.5 to 10.11, MacOS 10.12 or higher, iOS 12 or higher, iPad OS
1.
Turn on the keyboard using the power switch (
).
2.
Select the host number you would like to assign by holding the “fn” key and pressing 1, 2, 3 or 4 located on the numerical keypad
(press
+
simultaneously). You may use the most widely used host for "fn + 1" for easy recognition.
3.
Open System Preferences and choose Bluetooth.
4.
Ensure that Bluetooth is activated.
5.
Press the pairing button (
) on the backside of the WKB-1243 with a pen.
6.
Check the device list in the Bluetooth assistant. You should see "LMP WKB-1243". Select "LMP WKB-1243" and click "continue" or
the "+" tab.
7.
In Mac OS X 10.5 to 10.10, a 6-digit code will be displayed on the screen. Enter the code on the keyboard's numerical keypad and
press the "Enter" key on the numerical keypad. In macOS X 10.11 and higher, the keyboard will automatically establish a